Its predecessors have always been the first choice of the R/C press and the World’s top drivers. This success story continues with the LRP Pulsar Touch – impressively proven by another WC title: IFMAR EP Offroad Worlds 2011!
The Pulsar Touch shines with its revolutionary functions, a special touch screen display with graphic user interface and high-class features. This puts also the 4th Pulsar generation in a class of its own!
Another special highlight is the integrated high performance LiPo/ LiFePo balancer that detects differences in the cells and automatically starts balancing. This results in a longer lifetime and even better performance of the battery.
CHARGE LIPO - LIFEPO - NIMH - NICD
• Adjustable fast charge from 0.1 to 12.0A!
1-4 cells (LiPo/LiFePo) with automatic LiPo/LiFePo cut-off
1-8 cells (NiMH/NiCd) with adjustable Delta-Peak detection, linear or optional 5-step charge mode
(charging with variable current steps)
• Autostart-Timer for maximum comfort
• Storage Mode: The battery is charged/discharged automatically until the optimum voltage
for storing is reached. Longest cell lifetime!
DISCHARGE LIPO - LIFEPO - NIMH - NICD
• Adjustable high-power discharge current up to 20.0A! For perfect matching of your batteries
• Adjustable cut-off voltage for a perfect adaptation to all type of batteries and number of cells
CYCLE LIPO - LIFEPO - NIMH - NICD
• Automatic Cycling Mode (Discharge - Charge - Discharge) for perfect conditioning of your batteries
The following items are already included: USB wire, output wire with alligator clamps, output wire with 4mm plug and balancing connector, Y-Hall Sensorboard including 3 sensor wires.
Touch screen Graphic Display, blue backlit
Integrated LiPo/LiFePo Balancer: The Balancer is specially developed for the use with LiPo and LiFePo batteries. It automatically detects cell condition for all 2- up to 4 cell batteries. If the difference between the cells is more than 5mV, the balancing starts automatically.
Brushless motor sensor port: for sensor check and rpm measurement
Receiver simulator port: for function check of speed controls and servos
Fully Adjustable: Intuitive program structure with graphical user interface, allows precise adjustment of all parameters
User Profile Memory: 5 factory pre-set profiles which can be customised, renamed and saved in memory
USB connection (wire included): for firmware updates
Microprocessor controlled: Fully adjustable for perfect operation, maximum performance and highest safety
Multi Protection System: 100% protection against output reverse polarity, short circuit, input voltage error and over charge.
Voltage calibration for maximum accuracy
DC Input 11-15V