Viktor Modelsport, Vunarići 1, 10000 Zagreb, tel.: +3851 3881 989

DOBRODOŠLI U SVIJET RC MODELA

Najbolji izbor RC modela u Hrvatskoj

RC AUTOMOBILI - ELEKTRO, NITRO, BENZINSKI

Veliki izbor RC automobila, rezervnih djelova i dodatne opreme

RC HELIKOPTERI - ELEKTRO, NITRO, BENZINSKI

Veliki izbor RC helikoptera, rezervnih djelova i dodatne opreme

RC AVIONI - ELEKTRO, NITRO, BENZINSKI

Veliki izbor RC aviona, aviomodela i dodatne opreme

RC BRODOVI I PLOVILA - ELEKTRO, NITRO, BENZINSKI

Veliki izbor RC brodova, plovila rezervnih djelova i dodatne opreme

Kompletna RC Oprema!

Daljinski upravljači, baterije, servo...

SkyRC SkyRC Power Switch 10Amp Dodatna oprema.. Product #: SK600054 Regular price: $120.00 $120.00

SkyRC Power Switch 10Amp

Proizvođač: SkyRC
Šifra proizvoda: SK600054

Cijena: 150,00 HRK

- +

SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch meaning to eliminate theproblems associated with intermittent contact of an ordinary mechanical switch.The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double side tape. (Two kinds of bottom covers are included, user can change the bottom cover.) The switch also features a LiPo mode, by turning this on the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turn off if you have other safeguards in place or using NiMH/NiCad battery. Beside that the power switch informs you about the remaining capacity and conditions of your battery pack.

 

 

SWITCH ON/OFF SETUP

 

 

1. NiMH/NiCad Battery Pack

 

 

For switching on please press and hold the button for one second. The PWR LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on.

 

 

2. LiPo Battery Pack

 

 

For switching on please press and hold the button for more than three second. The PWR LED and LIPO LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on.

 

 


Technical Data:

  • Input Voltage: 4-12V
  • Max. Current: 10 Amp
  • Battery Mode:
    1. NiHM / NiCad
    2. LiPo
  • Low Voltage Protection: 6.2V(LiPo)
  • Operating temperature: 0-50℃
  • Weight: ≤7g

Vaša košarica je prazna. Proizvode pronađite putem glavnog izbornika ili krenite u potragu s Naslovnice.

REGISTRIRAJTE SE